How to create a Long Section Puncture Plot in SURPAC (4/4)

How to color a DTM based on a Dfield and utilize this information to plot with puncture points.
This is the last part of the 4 part article series “long section puncture plots”. In this final post, we will learn how to color a DTM based on a Dfield (in this case gram meters which is in D9) and use this information to plot with the puncture points created in the first article.
STEP 1
Open up the dtm that was created in blog 3 for contouring. D9 contained the gram meter calculation, and the bin ranges for the contour where from 37.59 to 86.85 at intervals of 5
STEP 2
To color DTM by the D9 field.



STEP 3
Plot the colored dtm as a raster image


STEP 4
Open up the simple puncture plot from the first blog in the series and adjust the text if need be and save.

STEP 5
Click back on the rasta plot and file>open. Open up the simple puncture plot you have just edited the text on and make sure you select append.

STEP 6
Add the legends as shown in previous blogs in this series.

STEP 7
Save and plot
When to use this
This final part brings the series together. A long section coloured by gram metres, with the puncture points on top, shows where high-value intercepts cluster on the orebody plane. Because gram metres combine grade and thickness, the map highlights the zones that matter most for mining, not only the high grades.
Plots like this are widely used to plan infill drilling, outline ore shoots and support stope design discussions. If you have not followed the earlier parts, the puncture points and contour surface used here are prepared in parts 1 to 3.
Practical checks
- Confirm the gram-metre values were calculated in the same way, with the same cut-off, for all holes.
- Check that the colour bins cover the full range of values so no part of the surface is left uncoloured.
- Make sure the raster plot and the puncture plot use the same section plane and plot scale before appending.
- Check that the legend matches the colour bins and units used on the surface.
Related at ACALA
Find the other parts of this series in ACALA tips. Learn more about GEOVIA Surpac, or ask about our resource estimate service.
Next step
Want your team to work this way every day?
Our courses teach these workflows in GEOVIA Surpac, Whittle and MineSched, and our support team answers the questions that come up afterwards.